Product Introduction
Butterfly Clip for WPC Decking: Precision Wing-Lock™ Technology
Material: Stainless Steel 201/304/316
Thickness: 0.8mm
Overall Size: 45mm × 45mm
Color: Silver (Standard) / Black (Powder-Coated)
Gap: Fixed 6mm (Adjustable 5–8mm via substructure spacing)
Piercing Method:
Convex Claws: Aggressive grip for high-density WPC
Flat Claws: Splinter-free hold for standard composites
Installation: Stepping Mounting (edge-driven) / Middle-Fixed (joist-center)
Applicable Board Height: 7mm–9mm groove depth
Technical Advantages
Wing-Lock™ Mechanism:
8 angled claws (4 per "wing") bite vertically at 25° into board grooves.
Self-tightening under load: Compression force ↑ 15% after thermal cycling.
Structural Resilience:
0.8mm SS304/316 resists torsion (1,200 N·m/m²) while allowing ±0.5mm flex.
Salt-spray certified: 1,500 hrs (ASTM B117).
Optimized Installation:
Stepping Mounting: Hammer-driven edge-lock for starter boards.
Middle-Fixed: Screw-secured to joists for mid-span stability.
Performance Data
Metric Value Standard
Shear Resistance 550 lbs/ft per clip ASTM D1761
Thermal Tolerance ±7% board movement EN 13687
UV Resistance ΔE<2.0 after 3,000 hrs QUV ISO 4892-3
Installation Speed 15 sec/clip (vs. 45 sec U-clip) Field data
Applications
SS201: Indoor/low-humidity decks (cost-optimized).
SS304: Standard outdoor decks (residential/commercial).
SS316: Coastal/poolside installations (chloride resistance).
Black Coated: Aesthetic matching for dark WPC boards.
Warranty: 25-year anti-failure guarantee against deformation/corrosion.
Installation Workflow
Groove Prep: Ensure 7–9mm groove depth (WPC board).
Clip Selection:
→ Convex claws: High-traffic/wet zones
→ Flat claws: Dry regions/low-density boards
Mounting:
Stepping Method: Insert clip edge, hammer-tap until wings engage.
Middle-Fixed: Align over joist, drive 2.5mm screw through center hole.
Board Join: Slide next board groove onto exposed clip wings.
Material: Stainless Steel 201/304/316
Thickness: 0.8mm
Overall Size: 45mm × 45mm
Color: Silver (Standard) / Black (Powder-Coated)
Gap: Fixed 6mm (Adjustable 5–8mm via substructure spacing)
Piercing Method:
Convex Claws: Aggressive grip for high-density WPC
Flat Claws: Splinter-free hold for standard composites
Installation: Stepping Mounting (edge-driven) / Middle-Fixed (joist-center)
Applicable Board Height: 7mm–9mm groove depth
Technical Advantages
Wing-Lock™ Mechanism:
8 angled claws (4 per "wing") bite vertically at 25° into board grooves.
Self-tightening under load: Compression force ↑ 15% after thermal cycling.
Structural Resilience:
0.8mm SS304/316 resists torsion (1,200 N·m/m²) while allowing ±0.5mm flex.
Salt-spray certified: 1,500 hrs (ASTM B117).
Optimized Installation:
Stepping Mounting: Hammer-driven edge-lock for starter boards.
Middle-Fixed: Screw-secured to joists for mid-span stability.
Performance Data
Metric Value Standard
Shear Resistance 550 lbs/ft per clip ASTM D1761
Thermal Tolerance ±7% board movement EN 13687
UV Resistance ΔE<2.0 after 3,000 hrs QUV ISO 4892-3
Installation Speed 15 sec/clip (vs. 45 sec U-clip) Field data
Applications
SS201: Indoor/low-humidity decks (cost-optimized).
SS304: Standard outdoor decks (residential/commercial).
SS316: Coastal/poolside installations (chloride resistance).
Black Coated: Aesthetic matching for dark WPC boards.
Warranty: 25-year anti-failure guarantee against deformation/corrosion.
Installation Workflow
Groove Prep: Ensure 7–9mm groove depth (WPC board).
Clip Selection:
→ Convex claws: High-traffic/wet zones
→ Flat claws: Dry regions/low-density boards
Mounting:
Stepping Method: Insert clip edge, hammer-tap until wings engage.
Middle-Fixed: Align over joist, drive 2.5mm screw through center hole.
Board Join: Slide next board groove onto exposed clip wings.
